TopHat® Protector BR 0.5 - Giglio 90-100- 110gn
The TopHat ® Protector is a one-piece precision tip, which wrapped carbon shafts in the first 1.5 mm and protects against breakage and splitting. Giglio - form: The Giglio-form (Italian for "lily") combines the advantages of a very elegant bullet shape with even better ductility by a clear narrowing of the tip to the stem. Material: Stainless steel (VA): The material is corrosion resistant stainless steel and is also resistant to long-term weather and other outside influences. The solid material can always be sharpened. TopHat ® Protector High Technology: By coating the tip of the carbon fiber is fully protected at its weakest point. Nor is it now makes sense to deliberately shoot at hard objects, but tests have shown excellent survival rates for the shafts. The adhesive grooves on the shank of the tip are kept deliberately low. Thus it is prevented that an excessive amount of adhesive can be applied (wrongly distributed adhesive can otherwise lead to imbalance). Installation: After about 60 seconds, the tip protector securely bonded to the carbon shaft (using TopHat ® Bond). The carbon shaft prior roughen the inside a bit and clean with a solvent. 1-2 drops TopHat ® Bond type on the top of the shaft and glue it with a twisting motion until it stops. Simple Drag: As with wooden shafts is aware of the tip diameter slightly greater than the calculated carbon shaft, which leads to a widening of the entry wound and facilitates the removal of the arrow significantly. Concentricity of the peak: 0.006 μ Break-off: The tip is equipped with one or more breaks-offs at the end. This break-offs can be canceled at will by the ideal weight peak to achieve. Special grooves for the break-off area to ensure that the weight tolerances are small in absolute terms when you cancel. For gluing the TopHat ® Protector ® TopHat tips we recommend bonding.